Try these simple steps to solving dishwasher problems. You’ll be supprised how easy it is to correct some common dishwasher problems.
Look at this list, then check the adjacent suggestions. They may give the answer to your problem without having to telephone your Service office.
Problem Actions
It will not start or fill… Is the machine plugged in and switched on at the socket?
Is the door securely closed and latched?
Is the socket OK? Try another appliance in the socket. Are the fuses in the machine plug and the fuse box OK?
if not, replace it.
Is the water turned fully on and the hose not kinked?
Have you selected a programme and switched on?
Iis the filter fitted in the water inlet hose OK?
It will not pump out the water… Is the hose kinked?
If you have connected to a sink waste pipe, is the spigot
blocked?
Are the filters blocked?
The machine is leaking… Is the inlet hose firmly attached to the water supply?
• if your machine is not permanently plumbed in; did you empty the hose into a bucket after disconnecting from the tap?
• if your machine is permanently plumbed in; is the standpipe at
the correct height, and/s it the correct bore?
• Could it be condensation from the wall?
It keeps stopping and making clicking noises.. • Do not worry. the timer is working and selecting the next
operation, and there are also pauses whilst the water heats up.
Specks of food particles Remove and clean filter jets
